Product introduction Accessory for KATO UniTrak. A system with a three-lamp type traffic signal installed on the left side surface of a single wire line with a length of 124 mm, which is half the basic length (248 mm) of the straight line. When the vehicle passes, it turns from green to red, and after a few seconds it automatically returns to red ? yellow ? green. LEDs are used for traffic lights, realizing hue and compact size. Touch sensor (flange touch) method of reliable operation, use also in the night scene is no problem. Also, because it is a single operation type for each unit, simply connect one red wire code (85 mm in total length) to the automatic signal machine power supply. * It does not operate as a signal machine with only 3 light type automatic traffic light machine. Please purchase accessory adapter (24-829) and automatic signal machine power supply (24 – 844) separately for connecting to power pack standard S. (From Amazon.co.jp) Three-lamp type automatic signal machine based on UniTrack Line 124 mm from Amazon. When the vehicle passes through, the signal changes from green to red, and after a few seconds it automatically returns to red ? yellow ? green. A light emitting diode (LED) is used for traffic lights, realizing a hue and compact size. Since it is a touch sensor system of reliable operation, there is no problem in use in the night scene. Since operation is independent and single operation for each machine, electrical wiring is completed only by connecting a single cord. Show all product descriptions

Product introduction A straight line with a length of 62 mm. It is 1/4 of the length of the line with the basic length of the straight line (S248). It is a line for passing the current for driving the vehicle from the power pack to the railroad track. The length of the cord 85 cm. UniTrak sets a line with a length of 1/4, 1/2, and 3/4 of the straight line 248 mm as a reference. Since railroad crossings, traffic lights, elevated railroad tracks, etc. are also made in compliance with their dimensions, you can easily build up the layout plan with a sense of blocking. (From Amazon.co.jp) About this manufacturer Blue Train running through the night fog leaving the light bulb of the long train and the tail light watched over the bullet train for the first time on the railroad track. Let’s reproduce memorable scenery with a railroad model. KATO supports everyone’s railroad model Hobby Life, including vehicles that were active in various eras and areas, railroad model railroad model railroad models, coloring railroad models necessary to drive the railroad model, coloring and layout production. KATO’s track system “UniTrak” and control equipment are designed according to international standards. If it conforms to the standards it can enjoy a wide range of railway model vehicles from any manufacturer in the world.

Product description Kato’s line of UNITRACK offers a variety of pieces, turnouts, bridges, structures, and accessories to allow you to build any layout your heart desires, all while ensuring track quality and steady delivery of electricity to your locomotives. Available both as individual pieces and as track sets, let Kato UNITRACK be the first track you put down, and you may never use another track again! From the Manufacturer This is a four pack of blister carded curve track pieces for use with the UNITRACK N gauge track system? The Curve radius and degree descriptions describe what portion of a complete circle (360º) is made from each section and how big that circle will be (in this case approximately 22′, or double the radius? Radius measurements for curves such as these are measured from the center point of a circle to the center line of the track, making it easy to keep track of how large your layout will be when you’re still in the planning stages!